For process applications, the operator must determine the concentration of FOAM-X based on the need at the time it is to be dispensed. One to 100 parts of active silicone per million parts foamer are sufficient to eliminate most foams. Begin trials with 100 ppm active silicone, as follows:
13.34 oz in 1000 gal water <> 2.6 gal in 2,500 gal. Both solutions = 100 ppm
In carpet extractors, steam cleaners, and automatic floor scrubbers, use 1 oz. per 10 gallons of expected recovery water. Begin by pre-diluting the Foam-X into a quart of water, and place it in the recovery tank.
Appearance……………………… Milky white, viscous liquid
Odor……………………………….. None
Specific Gravity………………… 1.00
pH………………………………………. 7-8
Percent Active………………………. 10 %
Emulsifier Type……………………… Nonionic
Flammability………………………….. Non-flammable
Dilution…………………………………. > 1000 to 1 with effluent
Evaporation rate………………………. Very low
VOC’s…………………………………………. None
Solubility in water…………………….. Complete
Biodegradable………………………….. Yes
Storage Stability……………………….. Excellent, 1 year minimum
USDA Registered?……………………… Yes
Exempt from tolerance at 40 CFR 180.1001 (d) for pesticide for mulations – applied to growing crops only
Irritating to eyes. Prolonged or repeated contact may irritate skin.
